How to Make a Dog Bed with Sides

Do you want to know How to Make a Dog Bed with Sides? There are many wonderful, creative DIY dog bed ideas for pet owners, and most require little time. Once you’re finished, your dog will have a comfortable place to sleep, and you might even make a little money.

You can locate the ideal DIY dog bed concept regardless of the size of your dog. Here are some tips and instructions to help you create the ideal bed for your ideal pet, whether you want to keep it in the living room, the bedroom, or a corner of your office floor.

Several suggestions for your DIY dog bed project

You have several possibilities when creating your DIY dog bed. Looking to put something to another use around your house? Even a standard cupboard might be transformed into a fold-away dog bed that you can store away when not in use.

The Best Way To Make A Dog Bed Without Sewing

You can still build a dog bed quickly, even if you need to be more skilled with a needle and thread or own a sewing machine. This is the procedure.

Determine the desired bed size.

The size of your dog will significantly impact the size of the bed. Make sure to leave approximately 12 inches extra on each side of the cloth you choose to make the bed since you will need to cut it down.
Miniature dog, measuring 15 inches wide by 17 inches long.
Small dogs, about 18 inches wide by 24 inches long, like a Pomeranian or Yorkie
Beagle, Border Collie, or any medium-sized dog, 21 inches broad by 30 inches long.
Boxer, Chow Chow, Dalmatian, or another large dog: 23 inches wide by 36 inches long.

If you have a large dog like a St. Bernard, you should prepare a bed between 28 and 30 inches broad and 42 to 48 inches long.

The supplies you’ll need to construct the bed should then be gathered. Get a cushion and a few pieces of fleece cloth for the bed’s centre. Use a memory foam piece, an old cushion, or something similar. A ruler or measuring tape and some fabric scissors are also required.

Bringing Everything Together

Begin by setting one of the fabric pieces face down. It can be placed on the ground or on a sizable table.
Center the cushion on the first piece of material.
Cover the cushion with the second piece of fabric.
Pick up the measuring device or ruler and cut the fabric to the suggested size. On either side of the bed, try to leave an additional six inches of cloth.
Cut the extra fabric into strips and place one on each side of the bed. After that, knot those strips twice to finish.

Another Suggestion for a Cheap DIY Dog Bed

Even though making this dog bed may need a little more work, it will still be considerably less expensive than purchasing one from your neighbourhood pet shop. For a medium-sized dog, the materials should cost you at most $25. You should buy twice as many clothes if your dog is really large. Additionally, you’ll require a larger mattress pad.

What you'll require

Mattress pad with memory foam (1 inch thick – fold in half to make a 2-inch thick cushion)
the zipper (at least 22 inches long)
Outdoor textile (about 2 yards worth)
Thread
Scissors
a sewing device

Building It Up, Step by Step

In essence, you are creating a pillowcase to hold the mattress pad. Fit the fabric to the pad after turning it inside out. You’ll have some leftover fabric scraps that you can utilize for future home improvement projects.

Attach the zipper and sew it in after sewing three sides together.

After that, insert the mattress pad by opening the zipper. You can take out the filling and wash the fabric if it has a zipper.

How to Construct a Dog Bed at Home With a Few Old Pillows

A few pillows just taking up room in your closet or other parts of your house could be transformed into a cozy spot for your pet.

what you'll require

Fleece (one piece – 36 inches by 78 inches) (one piece – 36 inches by 78 inches)
Two pillows, each no bigger than 17 by 36 inches, for this particular bed.
Thread
tape measure
an erasable pen
a sewing device
Scissors
Pins

How to Execute

Fold the fleece’s shorter ends by approximately half an inch, and pin each end together.
To shape the fleece into a rectangle, fold the other sides inward by approximately half an inch and sew one of them together.
Slide the cushions into the unstitched end before sewing the end shut.
Watch your dog doze off after placing the bed on the floor or inside the puppy kennel.

Make A DIY Dog Bed Out Of A Recycled Tire If You Want To Try Something Different.

Granted, this is definitely out of the ordinary. Still, with a little work, you can quickly transform a tire into a dog bed that will double as a wonderful conversation starter and prevent the tire from being added to a landfill.

What you'll require

An old tire (you can probably get one from your local tire shop)
Apply rubber-sticky paint with a paintbrush in a hue that complements the style of your house.-A worn-out flat box (to set the tire on while you paint it)
Felt pads with adhesive
A circular pillow (anywhere from 30-34 inches wide)
Water and soap (dish soap will be fine)
A brush with brittle bristles

How to Execute

Use the brush, soap, and water to clean the tire thoroughly. You can use a nail to remove any debris in the treads. Although not necessary, it also won’t do any harm.
Thoroughly rinse the tire and allow it to air dry. It should take an hour or so.
Coat the tire with paint. It will only be available to you at a time. You must rotate the tire to access the component resting on the flattened box. You can choose to use two coats.
After the paint has dried, add the felt pads to the tire’s bottom. These will aid in protecting your floor.
Finally, add the pillow.

Happy hunting, and good luck!

Have fun with your project, whether you want to construct a straightforward bed or get more complex. The finished product will make a cozy haven for your pet.